R8 Slitting Saw arbor holder, holder for 5 x 75mm/3" blades, plus simple holder for any size blade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another machine tool wall mount holder. This one is to hold an R8 slitting saw arbor and blades. The arbor i have is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another machine tool wall mount holder.
This one is to hold an R8 slitting saw arbor and blades.
The arbor i have is for blades with a 1 inch centre hole, so it has a 40mm diameter ring at the end of the R8 arbor stub, the hole in the bottom of the holder is 32mm.
As my arbor has a left hand thread i added text on the holder to remind me of this when i am trying to release it and really tightening it up.
There's 2 versions of the arbor holder, on with and one without that text.
I did a simple colour change at the text layer for the next 2 layers in the slicer, as you can see it gives a 2 layer line of the text colour on the back of the arbor wall bracket too.
You can do the same, or print it in one colour then color the text in with a marker.
Or more likely if your arbor has the more normal right hand thread, just print the no text version.
The saw blade holder is for 75mm / 3 inch diameter saws, it can take 5 blades and stacks them 4mm higher than the one in front (can't show that yet, as waiting for my order of more blades still)
The slots are 2.5mm wide.
When my other slitting saws came in the post, they turned out to be 100mm/4 inch ones,
So rather than make another pocket style holder just for those 2 blades, i made a simple holder that holds the blades by their holes on the wall,
It's got a step to stop them falling off, it's not just a simple circular piece, this this is my simplest holder yet.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15%
Filament: Cheap PLA PLA Yellow n Black
Notes:
The version of the arbor holder with text on it, the text colour change is done manually in your slicer program,
At the layer just after the text begins, insert a colour change..and 2 layers later change it back.
I guess you could get fancy and adjust the slicer to print just the text, then change to the main colour to print the back wall of the holder, but i haven't tried anything like that yet.
Category: Machine Tools