Zyliss drum grater drill adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
General Description
A adapter to power a Zyliss drum grater with power drill. No changes to the grater needed, connects the same way as the standard lever for manual power.
I recommend using the torque limiter of the drill to prevent accidents if something gets really stuck. Use on your own risk.
Consists of three pieces, the two legged part holds everything together. It is designed to be screwed to the the middle part with a m3 screw on each side. Two 3mm long m3 thread inserts should be inserted in the middle part. I used 9mm long m3 screws with 5.5mm x 3mm head to assemble. If you dont have this parts avaliable it may also work if you use cable ties or similar to clamp the legs to the middle part.
Printing
I printed the parts with PETG which is the only material I have. Screw with 0.12mm layer height, others with 0.16mm. The two legged part was printed laying flat for more stability. I used a bit support on the round part where the chuck of the drill attaches.
I changed the dimensions a bit after printing it, because it fit only very tight to the drum attachements. Whould be nice if feedback is provided after trying it out.