1 / 3
The Recreator3D.com Community Bottle Dryer V2 - PVC Pipe OpenSCAD Remix — zdjęcie 1
1 / 3

The Recreator3D.com Community Bottle Dryer V2 - PVC Pipe OpenSCAD Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the Tube model to use PVC pipe and OpenSCAD coupler fittings.

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I had issues printing the “tube” model from the original design.  The supports were very hard for me to remove without damage.  I had some old PVC pipes lying around, so I chopped them up instead and made some simple fittings.

The fittings are not super tight but I still dried four bottles quickly.  I think it makes it easier to disassemble or reconfigure for more or less bottles.

Print one at a time until you get the snugness you desire.  I did mine in PETG so the dimensions changed slightly.  Your mileage may vary.

Tagi