1 / 1
Hex Light Inner Tile
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While printing the Hexawall I found that the inner tile should not have had a solid bottom.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I attempted to save the .3mf project so that it wouldn't need to be scaled by other end-users. If you download and it is not scaled (you will definitely know if it's not), just scale down to 10% on all axis. Correct size would be 108.08mm on the X axis, 97.40mm on the Y axis, and 30.00mm on the Z axis.