Excelsior ladder replacement feet (front)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement front feet for "Excelsior" household stairs
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
One of the front plastic feet of my household stairs, 5 steps, of “Excelsior” brand (I think these are manufactured by Altrex), had disappeared, and the other one seemed to be on the way out, too. I modeled and printed two replacement feet. This fits their 40 x 20 mm rectangular rounded (5mm radius) profiles, and may fit other ladders using similar profiles as well.
I printed these in TPU 95A for better surface grip, but e.g. PETG should work well too. Print upside down, with 6 walls/25% infill, and best enable support. Just snap on, they should be a tight fit.