Hummingbird Extruder - Filament Release Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification of the Hummingbird extruder to add a filament release lever on the side.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 702
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hummingbird Extruder - Mini Stealth version
I wanted to add compatibility for the Hummingbird extruder for the release of the Mini Stealth v2 but I felt that it needed a filament release lever to be easier to use. This is what I came up with.
There is a blank front as well as the pictured logo+hex version. The back piece is the most changed in order to make space for the release lever. The front piece was only modified to match the new back piece. The idler arm has been slightly modified to fit better inside the top of the Mini Stealth shroud.
The filament release lever is installed with an M3x10 grub screw before installing the idler arm and the front of the extruder. The rest of the extruder is assembled in the same manner as a stock Hummingbird extruder.
This is designed to be printed in ABS/ASA with standard Voron settings (40% infill and 4 walls) but other filaments should work as well if not used on an enclosed printer.