wire/rope/cable clamp with hanging loop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to securely fasten a loop to a small wire or cable to hang things without it moving in different directions.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed from: https://www.thingiverse.com/thing:5579277
I needed to be able to hang things from an overhead cable. I added a ring to the bottom of one side of the rope/cable clamp so that I could do just that!
I've been hanging flags that move around quite a bit in the wind, using just PLA and it has held up very well for over a year now. Made with m5 bolt and nut
fits 1/16 inch (1.6mm) vinyl coated wire rope vinyl coated to 3/32 inch (2.4mm)
I did not adjust the "nut part" of the clamp from the original design just uploaded it for ease of use.