4 inch Angle Grinder Chop Saw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ordered a few 3mt lengths of 2020 extrusion which I will have to cut so amended Pivoting Angle Grinder Stand…
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 1063
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Ordered a few 3mt lengths of 2020 extrusion which I will have to cut so amended
Pivoting Angle Grinder Stand (parametrised) by Tig29
to fit my grinder and added a 20mm cutting channel mounted to 120 mm board and clamped to any worktop will serve my purpose.
Tested and proved see picture 2 x 3mtr lengths of 2020 cut for 3d Printer and Sardauscan Scanner in less than 10 minutes. All cuts good and accurate but always remember measure twice cut once.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Notes:
Dense fill used as wanted strength and durability
Category: Machine Tools