1 / 6
Custom Wheels for Lego Icon 10330 McLaren MP4/4 (Ver.2 uploaded) — zdjęcie 1
1 / 6

Custom Wheels for Lego Icon 10330 McLaren MP4/4 (Ver.2 uploaded)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my maiden 3D Print and Custom Lego parts project. Go my own way to make Lego MP4/4 looks COOL.

Ocena
0 / 5
Polubienia
25
Pobrania
311
Wydruki
0
Wyświetlenia
2854
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

Everyone wants a custom wheels for this MP4/4 Lego set are same reason…
However, I can't found a after market parts, so I carry on my first try.

Project characteristic

  • Blender based project.
  • Referenced to a lot of MP4/4 public source. 
  • My creation is obey Lego parts format. The scaling is front wheel based.

Model Feature

Version 2 (Updated : 7 May 2024)

  • 6 Stroke Rims. Shape redesigned. Rear Wheel REAL scaled. 
  • Objects are 216 steps cylinder based.
  • Tires and Rims are different parts, this able everyone apply different material.
  • Tires prepared 1.5 mm wall, Rims 1.5 mm wall.
  • Tires prepared 5 mm inner ring for glue or tape.
  • No larger Rear tires due to no room.
  • Four Wheels are margin. 
  • Required rebrick for margin :
    - Front Wheels arms need 3L Axle and 3 of Technic half bush to lock,
    - Rear suspension mount need reduce to 3 holes. 

Version 1

  • 6 Stroke Rims. 
  • Objects are 216 steps cylinder based.
  • Tires and Rims are different parts, this able everyone apply different material.
  • Tires prepared 1 mm wall, Rims 1.5 mm wall.
  • Tires prepared 5 mm inner ring for glue or tape.
  • Rear Tire have two radius types, due to public source always shown have 2 version on it.
     

Notes

In case I didn't have 3D printer, my own sample is requested to workshop and they are industry prototype purpose. Quality may vary to other consumer 3D Printer. 

My photo sample is build by SLA, Rims are resin, applied Tamiya TS spray “Semi Glossy Black”. Tires are black colored resin. Applied double tape to combine. (just fit the radius , no room for 2 levels.)

In practice, when Rims and Tires are Resin vs Resin, the part gap is narrow, only allow double side tape in single layer. If TPU as Tire, may possible match without glue.

In case, the project suppose is model kit building alike, if want to print in single piece, work around is required.

Make sure the model size :

Version 2:

Front Rim = 2.83×1.9×2.83cm
Front Tire = 5×2.2×5cm

Rear Rim = 2.83×2.86×2.83cm
Rear Tire = 5×3.16×5cm

Version 1:

Front Rim = 2.83×1.9×2.83cm
Front Tire = 5×2.2×5cm

Rear Rim = 2.83×2.5×2.83cm
Rear Tire = 5×2.8×5cm
Rear Tire (bigger radius) = 5.4×2.8×5.4cm
 

Tagi