Anycubic Kobra 2 pro Mosfet Box (Lerdge 30A)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a Mosfet Box for the Lerdge 30A Mosfet with fan support . It's designed for the use on a Anycubic Kobra 2 pro.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a Mosfet Box for the Anycubic Kobra 2 pro.
I use it for a Heatbed Mosfet and the box is conected with 2x M4 screws and t-nuts on the left side of the K2pro.
In the top is space for a 4010 Fan who will connect direct to the Mosfet.
I use for it short (voron) M3 melting inserts. (10x)
The only part you need support ist the top bridge at the box.
I've added a version mith 0.25cm holes, so you could screw a M3 in and don't need any melting inserts. I don't printed this version so if there is any problem with it, let me know.
I've printed it in petg with 0,2mm.