Samsung S7 Holotape Shell from Fallout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little shell I designed for a Samsung S7 Portable SSD
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple little case I designed in Fusion360 a while back. It fits pretty well over a Samsung S7 SSD, with access to the USB C port. One side is a solid wall, the other has a bit of ventilation for heat dissipation.
I ended up cutting off the little clip tab as the tolerances were just snug enough that it friction fits and is pretty solid. There is enough wiggle room to remove the 2 halves to retrieve the SSD if needed.
Print on the small ends, no supports needed.
I ended up using Apple barrel paints as they're what I had laying around, but I bet y'all could make a nicer looking one with more professional paints. I also ended up doing a grime wash to make mine look like it was found out in the wasteland, but the next one I intend to use a gloss coat so it looks more pristine.
Note, This is not compatible with the T7 Shield model of Samsung SSDs. Only the less rugged version.