1 / 1
Male to Male Shower Wand Hose Adapter 20.20mm Threaded Create Your Own Shower Head! 0.75" or 0.80" 3/4"
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modeled this so I can hook two shower wand hoses together so I could reach kiddie pool and fill up with hot water:)
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 421
- Wydruki
- 1
- Wyświetlenia
- 1620
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (46)Powiązane
Male to Male 20.20mm hose adapter. I created to connect two shower wand hoses together. Depending on how you measure, could be 0.75" ( ¾" ) or 0.80".
I recommend PETG and 100% infill. It worked perfect for me, no leaks, however, keep in mind that I did not test with any significant pressure. You results may very. Use at your own risk:)