Fokoos odin 5 f3 folding bolt tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this bolt tray to go on the back of your Fokoos odin printer and store the gantry bolts when you have it…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this bolt tray to go on the back of your Fokoos odin printer and store the gantry bolts when you have it folded down for storage or transport. There are two different mounting options the more solid one is #2 which bolts to the y extrusion bracket. probably a good idea to use 2 mm longer bolt with this one. the other design clips on to the back it holds well for transport but if you push up on it too hard while opening the lid it will come off.
the lid and tray assemble with a piece of 1.75mm filament
Printing
however you like
I chose to use petg .3 layer height on a .6 nozzle at 20% infill
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
Yes
200
Infill:
20
Filament:
PolyMaker PETG
Category: 3D Printer Accessories