Shower shelf for bath fitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this shelf to fit bath fitter showers with the useless acrylic rod in the front. This hangs on the 22mm…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this shelf to fit bath fitter showers with the useless acrylic rod in the front. This hangs on the 22mm acrylic rod and holds smaller shower items. You will need to print two of each part A and part B . You will also need to print two of connector B and three of connector A.
UPDATE: updated the main body part to accept 3 of connector A pieces this increases stability of the joined parts.
Printing:
I chose to print all parts in PETG. part a, part b, and connector b are all printed with 20% infill no brim no supports. connector A I printed at 100% infill and with a brim. most printers should be fine to print everything at scale however if you typically have tolerance issues you could scale the connectors down to 99-98%
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Post-Printing
Join the two part As together with connector A. Insert both connector Bs in each end then attach both part Bs with the slip fitting and hang in your shower.
How I Designed This
All parts designed in tinkercad
Category: Bathroom