Funnel Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inserts for funnels, so you can separated liquids and solids.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inserts for funnels, so you can separated liquids and solids.
I mainly use it for washing stuff.
It makes it easier not to loose the things in the big bottles.
Taped it down for increased stability.
If you want a more solid connection, you can of course glue it down.
Funnel not included.
You can adjust the size so it fits your funnel in your slicer settings.
printed in ABS, 0.2mm layer height, solid infill.
You can probably get away with 30% infill, I chose 100% for water proofing.
For the model “Funnel_Insert_over_the_edge” there is an overhang on the brim so the insert cannot wiggle as much in the funnel.
Happy printing!