1 / 3
Caulk mounting plate for UniFi U6 Lite — zdjęcie 1
1 / 3

Caulk mounting plate for UniFi U6 Lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your U6 Lite access point using caulk

Ocena
5 / 5
Polubienia
3
Pobrania
36
Wydruki
1
Wyświetlenia
352
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is a mounting plate for the UniFi U6 Lite access point.

The one came with the box is intended for fixing the access point into wall/roof using screws. I don't really want to drill a hole into my wall, so I decided to create a custom mounting plate so I can glue it with silicone-based caulk.

Not sure about the compatibility with other generations/versions, but I created this design based on the mounting plate from U6 Lite. I haven't got the time to test it out yet, but I'm pretty sure the caulk will be strong enough to withstand the weight of the AP.

 

To install it, use 4 M3 6mm screws and fix both the mounting plate and the bracket together with hexagon nuts. Then, apply some double-sided adhesive tape (i.e. 3M VHB), and then apply the caulk into the caulk slot, stick it onto the wall and wait until the caulk dries. Finally install the access point with the cable plugged in. You might need to remove the cable bracket at the bottom.

Tagi