Walking stick wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project was to solve the problem of how to store and display my Grandsons wand / walking stick
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
This project was to solve the problem of how to store and display my Grandsons wand / walking stick.
This model was sliced and made with a Creality K1C with Carbon filament @15% infill.
I am sure PLA would work just as well.
Printed with wall face on the hot bed so no supports needed.
When putting the wand stick into the mount we pull the wand out and use the small diameter of the wand to fit through the gap. That way you don't need to feed it in from a height.
I have included my original Fusion 360 file for anyone to remix if required.