1 / 3
Holder for freshwater hose 40mm Camper — zdjęcie 1
1 / 3

Holder for freshwater hose 40mm Camper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder designed to guide a 40mm freshwater hose behind the furniture of a campervan

Ocena
0 / 5
Polubienia
17
Pobrania
55
Wydruki
0
Wyświetlenia
280
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This holder is designed to guide a 40mm freshwater hose behind the furniture of a (DIY) campervan. The outside diameter is about 48mm, the hose sits tight in the holder, which can be positioned at any height to allow for optimal slope of the hose towards the freshwater tank. 

Needs to be printed in ASA (no enclosure required) or ABS (with enclosure) to allow for higher temperatures to be expected inside the van in summer conditions. Holes suitable for countersunk screws 4*30.

Tagi