Meduse. Large lampshade in 44 minutes.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast printing doesn't have to be small.
- Ocena
- 4,923 / 5
- Polubienia
- 566
- Pobrania
- 3037
- Wydruki
- 28
- Wyświetlenia
- 14 516
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have seen several models that used the principle of a spiral (and even made similar ones myself), but they are not strong and stable enough. Therefore, I decided to use not 1 spiral and connection, but 8 spirals and 8 mounts.
Lamp diameter – 200 mm.
Suitable for IKEA HEMMA lamp and most other pendants with a socket of about 40 mm and an E27 base. It is not worth using incandescent lamps, install "cold" ones, for example LED ones.
Printing time is about 44 minutes with a layer of 0.3, a nozzle of 0.4. No support required.
For printing, you can use any plastic close in rigidity to PETG, PLA is more rigid, so the lampshade will not be long enough.