Car Window Flag for Germany

This is a free 3D printable model for a car window flag holder that proudly displays the German flag!

If you own a BambuLab Printer go here for easy printing. 

Features:

• Easy, two-piece design: Simply print the flag holder and the German flag itself (separate files for driver and passenger sides).
• Secure window grip: Designed to be wedged between your car window when partially lowered, ensuring a tight and stable hold even at highway speeds.
• No glue or additional tools are required: Just print and assemble!

Printing:

• I have tested this model with PLA, but I suggest PETG or stiffer materials for the flag holder if you drive faster than 50 km/h.
• If you use the STLs as the basis, you have to import all of the flag STLs (in a single folder) at once into the slice and confirm, that it shall be imported as a single object. Then you can change the color. This is a multicolor print. 
• The Flag holder has to be mirrored on the x-axis if you want to have one that can be used on the driver-side
• Print Settings: 3 walls, 20% infill (for flag holder), 3d-honeycomb as infill pattern, reduce speed to 70mm/s for the outer and top layer

Assembly:

1. Print the flag holder for your desired side (driver or passenger).
2. Print the German flag.
3. Lower your car window slightly.
4. Slide the flag holder onto the top of the window.
5. Close the window until the holder is secure.
6. Slide the German flag into the slot on the flag holder.

Changelog:

• 18/04/2024 - Initial Release

I hope you find this model useful!

Like this 3D model?

☕ Show your appreciation by buying me a coffee!

👍 Share your creation and leave a comment below with any feedback or suggestions!

Disclaimer

Check your local traffic laws regarding displaying flags on vehicles.