Barbapapa Family Nesting Dolls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The entire Barbapapa family (9 dolls), snuggly fitting together.
- Ocena
- 4,667 / 5
- Polubienia
- 73
- Pobrania
- 614
- Wydruki
- 3
- Wyświetlenia
- 2448
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The entire Barbapapa family (9 dolls), snuggly fitting together. You'll have to forgive the paint job, my 4-year-old insisted on helping!
There are 3 visual variations: The male members of the family, the female ones, and a special hairy one for the center piece, Barbouille. The 9 dolls have been modeled to have the same wall thickness and connector height, despite their different sizes.
All pieces should be big enough not to pose a choking hazard, but maybe err on the side of caution if your child has an extra-large pharynx.
Printing
I provided PrusaSlicer 3MFs with the below settings already configured. If you prefer using the STL files, please pay attention to the following:
- Seam: Make sure to use Rear for the seam position, to avoid unsightly lines on the face. I used a random seam for Barbouille, since he's supposed to be hairy.
- Brim: Contact surface is pretty small, use a brim.
- Supports: You probably need supports for the inside of the top parts. I've added some support enforcers in the 3MF files.