1 / 1
Chime Ring Battery Pegboard Hopper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pegboard mounted 'hopper' for Ring Doorbell Batteries. Designed to fit on 1" pegboard.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Can fit up to 5 batteries. Stack them by alternating the metal clips (left side/right side), or they won't lay flat.
Supports are needed due to the pegs + the sloped bottom.
I printed in the upright position so I wouldn't have support material throughout the body. That worked out alright, but the bottom support material was a bit difficult to get off, and wasn't the cleanest.
I did not put a hook on the pegs - a press fit worked for me. YMMV.