Classic Tray in 120 Sizes with Optional Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A classic tray with all dimensions from 10cm - 24cm, with optional aligned feet.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 141
- Wydruki
- 1
- Wyświetlenia
- 548
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
This is my design of a classic tray with a slightly sloped border. I made it to be used as a flat tray or with four feet to raise it somewhat over the surface.
How to Print the Knob
In the file section, you will find an example project LR2178 Print.3mf for the PrusaSlicer. Use this project to see the parameters I recommend, or if you like to slice the models from scratch, please have a look at the table below:
| Nozzle Size: | Recommended 0.4mm Working: 0.6mm and 0.8mm |
| Layer Height: | Recommended 0.2mm |
| Filament Materials: | PLA, PETG |
| Perimeters: | Two perimeters |
| Prusa Slicer Profile: | “0.2mm Quality” |
Dimensions
The name of each model has the following format:
LR2178-<width>-<depth>.3mf
The Width and Depth
The models' filenames contain the tray's inner dimensions in mm. To find the outer dimensions, add 8mm to these values.
There is only one model per width and depth; therefore, if you do not find the combination you are looking for, search for one with these dimensions swapped.
About the Optional Feet
The tray has alignment holes at the bottom with a diameter of 6mm and a depth of 0.8mm. You can ignore these holes or print four “LR2178-Foot.3mf” models. Glue these feet into these holes with a drop of superglue or epoxy.
Removing the Part Number and Alignment Holes
Adding a small box in the slicer software lets you easily remove the alignment holes and/or the part number from the model.
Explore More from Meti·kumi
Interested in my designs? Browse through my collection of 3D models:
👉 https://metikumi.com/3d-models/
Stay connected on social media for the latest updates and work-in-progress insights:
Conclusion
This is a very simple design, but sometimes you like to print a tray – nothing more. If you found it helpful, please rate it and upload photos of how you used it.
Happy Printing!