Led mount for monitor (screenbar)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The project led strip DIY screen bar.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The project has all the parts needed to create a connector for the LED profile to be sent to the monitor as a screen bar.
Printing
Use 100% infill for the part prepared for heart inserts. You can split the object into parts using a PrushaSlicer. (I tested the way, works fine)
I printed with layer 0.2; The result was with some artefacts near the thread.
Also, I printed the models with layer 0.1, which looks better, but it does more harm than good.
Other material which you need to create the mount.
- 2 bold M3, 3x30 (DIN 912)
- 2 bold M3, 3x10
- 4 heart insert
The model was created for the led holders.
Link to onshape project