Zyliss drum grater spout
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spout that attaches to the end of (older models) of zyliss drum grater to prevent particles flying around.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
General Description
A spout that attaches to the end of zyliss drum grater. This prevents grated stuff from flying around and missing the bowl. This is especially helpful when using the grater at high speeds, for example when powering it with a drill using the drill adapter.
The spout is only compatible with older makes of the drum grater which have a flat front face and a ridge on the outside of the front face; see pictures.
The spout is held on by four ridges inside the spout and four clips made into the walls of the spout. The clips have unfavourable layer orientation, but it worked with petg. I made another version that doesnt have those clips, but two hooks to attach it to the grater (for example with a rubber band around the funnel of the grater). You could use this version if you fear the clips braking off. I haven't tried this version though.
Inner diameter of the spout is 100mm.
Printing
I printed with PETG which is the only material I have. I printed with 0.2mm layer height. Support may be needed for the four ridges inside the spout, but maybe it also works without. The angle of the spout and all other overhangs are designed to be printed without support.