Metal knife sharpener support sliders (17°, 20°, 25°, 30°)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the popular metal knife sharpener found on AliExpress and maybe other platforms as well.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 261
- Wydruki
- 1
- Wyświetlenia
- 1410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is my first model since I moved from TinkerCAD to FreeCAD 😃
This sharpener support is only compatible with the metal knife sharpeners found on AliExpress. They are cheap and cheerful in my opinion. I was using a #1000 grit in the demo, and there are indeed other grits that you can get. In terms of sizing, this sharpener is approx. 151.50mm x 63mm x 3mm. Out of the 3mm thickness, 2mm is the foam pad.
I added a couple of large thumb holes on the sides for better grip.
For the support slider part, print with the text side facing down to minimise the need for support.