Tool-Grid 19mm Wheel Lock Key Tray Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These Tray Sets can hold 1, 2, 4, 10 19mm Wheel Lock Keys which can be fastened to Matco's Tool-Grid Organizer System
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 971
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Wheel Lock Key Tray Set for Matco Tool-Grid Tool Box organizer system. Holds 1, 2, 4, and 10 19mm Hex Wheel Lock Keys however I made the diameter of the sockets 23mm for a loose fit and ease of inserting and removing the keys from the holders as well as slightly curved edges for appearance. The bolts that come with the Tool-Grid kit will work perfectly fine with these and all bolt holes are useable together.
MODELS WILL NOT SCALE (effectively), it will cause the Tool-Grid mounting holes to be improperly aligned and sized.
Any suggestions? Please let me know in the comments!
- Basic Print Settings
Material: PLA
Layer Height: 0.20mm or 0.10mm
Infill: 15%
- Dimensions
Height: 13mm / 20mm -- Singles: 17.3mm / 24.3mm
Length: 29mm / 68mm / 62mm / 161mm
Width: 29mm / 29mm / 62mm / 69mm
- Socket Dimensions
Diameter: 23mm
Depth: 10mm / 17mm
Surface Height: 3mm -- Singles: 7.3mm