KUSBA mount for Creality Sprite Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This model can be used to mount the KUSBA v2 on top of the Creality Sprite extruder.
Sink a pair of M3 brass inserts into the top holes to mount the KUSBA, and run a pair of M3x12 screws into the side mounts.
This is a remix of an existing model made by codeadept, with the goal of adding some much-needed rigidity. After printing codeadept's original model, I found that the mount was pretty loose even with the screw well tightened.
Printed in PLA with 100% infill.
P.S. the resolution is a little low as compared to the original, since I had to convert it from STL to modify the model, but it hasn't caused me any trouble in real-world use.