1 / 4
Print-In-Place Flux/Solder Syringe Plunger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-In-Place plunger desgined for flux and solder syringes
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 83
- Wydruki
- 3
- Wyświetlenia
- 646
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (24)Powiązane
This Print-In-Place plunger is designed for conventional flux and solder paste syringes, and it has a plug to seal off the syring and avoid having the plunger fall out of the syringe when put down on the table.
I designed the plunger to be printed upright and have its collar to be supported via Organic supports as seen in the screenshots. I've printed it in PETG in an Ender 5 and had no problem with the clearance.
