1 / 3
TS100/TS101 Soldering Iron Holder Arm for Heat Insert Press — zdjęcie 1
1 / 3

TS100/TS101 Soldering Iron Holder Arm for Heat Insert Press

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A holder arm I designed for the very popular TS100/TS101 soldering iron to fit the Heat Insert Press designed by BaGooN.

Ocena
5 / 5
Polubienia
99
Pobrania
325
Wydruki
2
Wyświetlenia
3560
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

Based on the other holder arms provided by @BaGooN, I created a version to perfectly fit my TS100 soldering iron. This design uses only one screw for retaining the soldering iron, to preserve the ability to press both buttons on the side of the soldering iron. In my test print, I found one screw to be totally sufficient to hold the soldering iron rigidly. 

If you haven't yet purchased a heat insert adapter for your TS100/TS101, I discovered this link (I am not affiliated): https://www.aliexpress.us/item/3256806317181073.html

I also added some drafts so that it can be more easily printed face down without requiring supports. Orient with the “ears” (spring holes) facing up. I printed using Bambu PETG at 25% infill, 0.20mm layer height, 6 walls, using the OEM 0.4mm nozzle. Everything seems strong.

Tagi