1 / 4
Pinion Gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small pinion gear designed to work in a rack and pinion set-up. Sized to fit on a motor with a standard 6 mm D-shaft.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 524
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Through-hole fits snuggly on a 6 mm D-shaft commonly seen on DC motors.
Test printed on a Prusa Mk4, 0.4 nozzle, 0.1mm layer height, PLA, 15% infill. Took a little over 1 hour to print
Gear dimensions are:
- Module = 1.27
- Number of Teeth = 18
- Pressure Angle = 22 degrees
- Tooth Radius = 0.2
- Total diameter = 1 inch