G28 stock cheek piece adjuster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to adjust the cheek rest forward and backward with a m3 screw
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The G28 style stock is both incredibly cool and expensive. When I first received my G28 stock and tube assembly, I was really disappointed to discover that the cheek rest—supposedly the best feature of the stock—actually detracted from my experience. It was positioned too close to the back of the stock. Whenever I tried to aim, half of my face ended up in front of the cheek rest, making it uncomfortable. Unfortunately, there was no out-of-the-box solution to this issue.
Therefore, I decided to design a part myself and make it available to everyone in this community. It is a 3D printable piece that replaces the original metal piece. The new part maintains the ability to hold the eye relief distance when adjusting the stock, while also allowing for fine-tuning of its location as desired.
All you will need is an M3x14mm screw, an M3 tap, and an M5 tap. Be sure to tap the two larger holes with the M5 tap and all the smaller holes with the M3 tap. The position of your cheek rest can be adjusted depending on which small holes you install your M3 screw into.