Goldwing hitch cover brake light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a brake light hitch cover and I turned it into this. Use 10-32 by half inch stainless flat heads to put it…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
I had a brake light hitch cover and I turned it into this. Use 10-32 by half inch stainless flat heads to put it together. You might need to run a tap through the threads I did not. I always model oversized threads to allow for fitment. I also lined the inside with reflective tape and changed the bulb to a super bright LED. I used silk silver and transparent red PLA for the goldwing logo plate and Poly Carbonate for the shroud to hold up outdoors.
Added new logo for 2018+
Print Settings
Printer:
Tenlog TL-D3 Pro
Rafts:
No
Supports:
No
Resolution:
.15
Infill:
25
Filament: inland PLA+ and polycarbonate
Category: Vehicles