1 / 3
Propwash Simulations DIY Radio Kit Mount for Honeycomb Aeronautical flight products
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radio Planel frame using the Propwash Sim radio kit.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
6 Digit version of the PropWash Sim radio kit, may work with the Logitech yoke, not been tested.
Only works with the 6-digit version of the kit, and only supports 1 display.
Buy the required kit here: https://www.propwashsim.com/store/p/radio-kits (6 DIGIT KIT ONLY)
Video Tutorial on how to program electronics https://www.youtube.com/watch?v=YGrNcZI5cK0 (Start at 5:50)(Video by Captian Bob)
Required Mounting materials:
- Arduino UNO(if you want to use another board you will have to modify the files)
- https://www.thingiverse.com/thing:26237/files spacer for the Arduino(Protects the pins)(Version 0006 with the holes)
- PropWash Simulations Radio KIT (6 Digit Version)
- 4 M3x6
- 4 M3x8
- 2 M3x10
- 2 M3x12
- 2 M3x16
- 8 M3 Nuts
