Mothership Box Set Dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dividers for the Kickstarter version of the Mothership 1st Edition Boxed Set
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
WORK IN PROGRESS: Although I'm relatively confident these measure the right size, I'm still printing mine to verify. Will update description once I know for sure.
Some of the Mothership boxes, had crushed dividers. These are 3d printable replacements.
Attached are 2 options:
- No embedded magnets
- Magnet Versions to put 5mm x 1.8mm magnets
Printing:
No supports needed, infill shouldn't really matter too much. If you're using the embedded magnets, just make sure to add a pause right before it adds the top layer, insert your magnets and then continue the print.
If you're having issues with adhesion to the magnets, you can add a bit of gluestick to the top of them.