Parametric Bottle Holders for IKEA pegboards SKADIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 versions of a parametric cupholder for use with Ikea Pegboards. Centered and offset models are available.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Make the perfect sized holder for any bottle, cup, can, or other cylindrical object.
You choose the inner diameter, wall thickness and height of the holder and it will customize the model for you. It will give you a version that is centered on the pegs, and one that is offset(you can mirror this object if you need).
HEIGHT MUST BE GREATER THAN 55, otherwise it will give errors. It will work down to 20mm internal diameter, but works best from 30~65.
Print settings:
I recommend 4-5 walls, to ensure the hooks are solid for best strength.
SUPPORTS REQUIRED! but it shouldn't be much material and should be easily removed.
i have not done strength tests, but they are fairly sturdy.