Snapmaker Artisan Module Storage Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple bracket for storing your Snapmaker Artisan modules when not in use. It attaches to one of the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple bracket for storing your Snapmaker Artisan modules when not in use. It attaches to one of the enclosure's aluminum extrusions using M5 machine screws and T-slot nuts. It can be mounted horizontally or vertically, although I'd recommend horizontally so as to avoid dust depositing on the working side of the module, especially for the laser module. You'll need to print at least two of them (for the modules not in use).
These are the screws and nuts I used: https://www.amazon.com/dp/B0B1J3XHFF https://www.amazon.com/dp/B086MKNYDS
If you have the adjustable mounting plate on your module(s), pmzandbergen has remixed this design to accommodate the adjustment screws on the plate. Here's a link to his remix:
https://www.thingiverse.com/thing:6449661
Print Settings
Printer Brand:
Snapmaker
Printer:
Artisan
Rafts:
No
Supports:
No
Resolution:
0.2mm layers
Infill:
15%
Category: 3D Printer Accessories