1 / 4
HF Wire antenna strain relief for LDG Balun / UnUn
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact strain reliefs for LDG Baluns / UnUns suitable for portable HF wire antennas for ham radio.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
I've made these small footprint wire strain reliefs for portable operations, where the wire can easily be set up and also removed again when done. The slits are 2 mm wide, suitable for the specific 20 awg / 0.5 mm insulated wire that I'm using. It might need some adjustment depending on what wire you're using. The reliefs mount snugly to the balun / unun by a single screw. I'm using some m3 bolts and nuts. I have made a version for loops / dipoles and one for verticals.