World’s Tiniest F**k To Give – A fox-duck hybrid [REMIX]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save this little friend for when you truly can only give the tiniest, itty-bittiest f**k.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This micro version of my fox-duck design is possibly the stupidest thing I’ve made – and that’s not a short list.
Save this little friend for when you truly can only give the tiniest, itty-bittiest f**k. At 8mm tall, this f**k sends a message that you are not to be f**ked with.
This will require a 0.2mm nozzle or resin printer. There is no multicoloured variant as it would waste around 1000x more filament purely in flushing.
The story of the f**k

Sometimes you find yourself out of f**ks to give, so why not 3D print some more?
This is the ‘F**k’, a unique fox-duck hybrid creature – hence the name. These small creatures are designed to be printed quickly and without supports.
Check out the original model here!
Give a f**k to your friends and loved ones, if you wish. If you find yourself getting overwhelmed, you can tell them you have no more f**ks to give.
PS: A group of f**ks is called a cluster f**k.
Printing tips:
To print this with an FDM printer, you will need a sturdy raft or brim.
These were my settings that led to success. The smaller your nozzle, the more details you’ll get.
Layer height: 0.06mm
Nozzle: 0.2mm
Print speed: 75% of usual (I went from 200mm/s to 150mm/s)
Shells: 4
Infill: 0%
Cooling: 100%
Side note, this was a nightmare to try and photograph.