Mk3.5 LCD Cover Multicolor Without MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor print of the Mk3.5 LCD cover
- Ocena
- 4,5 / 5
- Polubienia
- 8
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 509
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Mk3.5 LCD cover with printable version of the sticker, USB symbol, and reset button. I've noticed the footer gets slightly cut off at certain angles, so the LCD area is slightly expanded compared to the stock R3 version.
A 0.25mm nozzle is highly recommended. The text thickness is set up for 0.12mm layers. Note the included gcode is for the Mk3.5. The 3mf and gcode are set up for printing WITHOUT the MMU, you will need to do the 15 tool changes manually. I found it helpful to print out the tool order and check each line off as I do each change.
Tool order:
Line 4981: T0 - Black (immediately after purge)
Line 11839: T1 - Orange
Line 12961: T2 - Gray
Line 14230: T3 - White
Line 15871: T4 - Red
Line 16135: T0 - Black
Line 24698: T1 - Orange
Line 25629: T2 - Gray
Line 27003: T3 - White
Line 30711: T0 - Black
Line 39220: T1 - Orange
Line 40164: T2 - Gray
Line 41542: T4 - Red
Line 41715: T0 - Black
Line 44701: T3 - White
Line 45576: T0 - Black
You should be able to print this on a Mk3 before upgrading, just follow this guide for setting up a manual multimaterial printer