Whey Container Kratky Hydroponics Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid that should fit on whey containers with 120mm ID lid Google Kratky non circulated hydroponics for usage details…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v2.0
Lid that should fit on whey containers with 120mm ID lid
Google Kratky non circulated hydroponics for usage details
has not been tested with plants, whey container might be too short to let significant air roots to develop (might just need to counter this by having it filled to just barely touching roots at first)
FreeCAD model file is included, that has an additional part that can be used to cut a mesh into the lid (reduces first layer time, but increases complexity)
Wasn't able to get it to fit until printed at, at least 100.7% scale (101% probably would work too)
Print Settings
Printer:
Tronxy x5sa Pro
Rafts:
Doesn't Matter
No
Resolution:
0.8
n/a
Filament: idk PETG white
Notes:
had 0.8 nozzle and 0.4 layer heights in mind when designing, but should be able to work with 0.4 nozzle and 0.2 (not lower layer heights:nozzle ratio for thread to be printable (i.e. for x diameter nozzle don't go above x/2 layer heights))
Category: Outdoor & Garden