Steeler's Mjolnir
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
resin print Lid will require some sanding as its a very tight fit. I opted to not use the printed inner core and…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
resin print
Lid will require some sanding as its a very tight fit.
I opted to not use the printed inner core and bought a wooden dowel for the handle. with a little work fits great and feels sturdy. attached it to hammer and pommel with JB Weld (love that stuff)
uploaded all the individual pieces included the alternate side plate I made
the extra gold bit on the hammer head- broke a bit getting it off the build plate but wasn't gonna let all that resin go to waste.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO MARS 2 Pro
Supports:
Yes
Infill:
5mm walls on base
Category: Sport & Outdoors