Lamp #6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An articulated turbine shaped lamp shade model that can use Lamp Base#2.
- Ocena
- 0 / 5
- Polubienia
- 122
- Pobrania
- 318
- Wydruki
- 0
- Wyświetlenia
- 2149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
An articulated turbine shaped lamp shade model that is shown using Lamp Base#2,
https://www.printables.com/model/850873-lamp-base-2
An additional STL is provided for a Snap-On lid which can be used to accent the lamp, see pics.
Shade - 200 mm height x 140 Width
w/ Base - 250 mm height
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/
3 x M3 by 10 Screws
https://de.aliexpress.com/item/32443118299.html?
3 x M12 Mutter (Nut for weighting)
https://www.amazon.de/dp/B01M30BU88?
3 x M3 Inserts
https://www.amazon.de/dp/B08BCRZZS3?
The slicer settings for the base :
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: Sunlu PLA+ White
The Shade and snap on lid:
Filament: Sunlu PLA+ White
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Aligned