1 / 6
Elegoo Neptune 3, 4 (Pro) Z-Axis Articulating RPi Camera Mount — zdjęcie 1
1 / 6

Elegoo Neptune 3, 4 (Pro) Z-Axis Articulating RPi Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Camera mount point fitting to X/Z axis of Elegoo Neptune 3 and 4. Adapter for Articulating Raspberry Pi Camera Mount.

Ocena
0 / 5
Polubienia
9
Pobrania
75
Wydruki
0
Wyświetlenia
1064
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Camera mount fits to the right side of the X axis and travels up/down on Z axis of Elegoo Neptune printer series. I originally designed it for my Neptune 3 Pro, but should also fit to other printers like Neptune 3 and Neptune 4. Please let me know if it fitted to your model.

The model has two snap in noses, so no screws needed.

The camera mount is aimed to connect to https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m It has a male connection at the lower side and a female connection at the top for you to chose. If you mirror the model before printing you can flip this orientation.

Be sure to add a nut to the female side before installing at the printer.

I printed it without support. But if you like you can add some at the beginning of the round parts.

My print settings:

  • PETG
  • 2 wall line count
  • 0.2 layer hight
  • 0.4 noozle
  • 50% infill cubic subdivision
  • no support

 

Tagi