Madrid 3D City Miniature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature 3D Modell of Madrid, Spain
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 275
- Wydruki
- 0
- Wyświetlenia
- 1582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dive into the architectural elegance of Madrid with this 3D model, showcasing the city's iconic skyline!
Model created using OSM as well as manually reconstructing several buildings.
The Model is completely square. I printed it at 30x30cm to fit in this frame: https://www.amazon.de/dp/B0CB7CJFCY?ref=ppx_yo2ov_dt_b_product_details&th=1
A frame is not needed. Model looks great by itself!
You can scale the model up or down according to your needs.
Print Instructions for 0.4mm Nozzle and PLA (smaller nozzle will offer higher degree of detail):
Layer height: 0.16mm
Layer width: 0.4mm
First layer: 0.2mm
Bottom layers: 2
Top Layers: 4
Bed Adhesion: Brim (depending on the bed adhesion of your printer a brim might help to keep model from warping)
Slicing the model can take a while due to high degree of detail!