1 / 1
Mini V wheel and Idler Cover Mod for VLMP Heat Set. — zdjęcie 1

Mini V wheel and Idler Cover Mod for VLMP Heat Set.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mini V wheel Carriages and Idler cover mod.

Ocena
0 / 5
Polubienia
3
Pobrania
30
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

For the carriage only use 1 washer on the wheel side between the eccentric nut and wheel. No washers between the built in spacers and wheels. Same hardware everywhere else works fine. (I only had M5x40mm lying around so that's what's in the picture. 

The Idler cover just bolts on between the washer and the bolt. Make sure the washer is still touching the flange bearing.