1911 Bench Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gunsmithing bench block, with many features for 1911s.
- Ocena
- 4,929 / 5
- Polubienia
- 190
- Pobrania
- 1336
- Wydruki
- 20
- Wyświetlenia
- 5719
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
A remix of Bench Block by entomophile. It's basically identical. I reverse engineered his .STEP file as a new Fusion 360 model, just to fix some minor geometry errors that were giving me print problems.
Fixing these errors allowed me to print the model with the V groove for barrel work on the bottom, so that it would print well without supports (the original didn't print well that way, because the supposedly-planar top surface areas were not quite planar.)
Printing Details
I printed in a Tough PLA, with triangle infill at 30% density. Triangle infill, with its continuous vertical walls, provides a great deal of strength at the top surface.
I found it necessary to print with a brim. Otherwise, the small crescent-shaped section at one side tended to break loose mid-print.