1 / 4
Br905 Fauvette — zdjęcie 1
1 / 4

Br905 Fauvette

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a static model (won't fly) of the iconic French glider Br905 Fauvette. The model comes into one ready to use…

Ocena
0 / 5
Polubienia
6
Pobrania
34
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Share Alike

This is astatic model (won't fly) of the iconic French glider Br905 Fauvette. The model comes into one ready to use bluid plate. If you are interested in meeting the real one, there's a nice Fauvette visible at the Apparat Gliding Museum (located in South of France).

Printed just fine on my Ender 3 with 0.16mm PLA layers, after a slicing done with PusaSlicer. No support needed. Enabling Prusa Slicer Adaptative Variable Height is recommended as it helps printing the wingtips.

No raft or brim used, these would probably be a pain to remove ^^

You may also want to check my full collection: ASK-13, my Br905 Fauvette, my JS3, Janus C, Libelle H205, Horten IVa and my Ka6e.

Finishing

  • Basic finishing can be done with just acrylic paint applied with a brush or even using a felt pen.
  • For a pro finish I use the following:
    • Rough sanding of the model
    • Apply UV resistant epoxy resin witha brush
    • Fine grain sanding
    • Acrylic paint applied with airbrush
    • Clear acrylic coating applied with airbrush

If you like that model please consider making a small donation to the "Cartable & Sparadrap" charity supporting school for children in Toulouse hospitals. Thanks :-)

Category: Vehicles

Tagi