GLIDER HANGER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hanger to get those model gliders off the floor!
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 127
- Wydruki
- 2
- Wyświetlenia
- 3034
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a really simple hook to get your child or grandchild's glider off the bedroom floor!
It really needs no explanation, screw holes are provided, but they are completely unnecessary for the load being carried.
In this instance I prefer a couple of small dobs of hotglue which should enable the hooks to be removed (with care) without damage to your wall surface.
Suggested printing is PLA PrusaSlicer 0.3mm DRAFT mode with a 0.4mm nozzle.
Printing in QUALITY mode takes a little longer and on a well tuned printer will make negligible difference to the quality.