1 / 6
Arduino NANO mounter for wooden boards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another holder to mount an Arduino NANO on a wooden board
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
You can mount your Arduino NANO on a wooden board with this holder and 4 screws.
It is good for direct soldered wirings.
You can push the reset button easily.
Easy access to the USB and ICSP connectors.
Prepare 4 pilot holes in 17 mm x 55 mm.
holes.pdf may be useful.
Materials and Printing Methods
Build Plate Adhesion: Skirt
Infill: 30%
Filament: PLA
See a photo of printing setup, for example.